Quilting; Straight Stitch Needle Plate - ELNA eXcellence 740 Manual

1
2
3

Quilting

Machine settings
Pattern:
Thread tension:
Presser foot:
Foot pressure:
Attaching the quilt guide
Insert the quilt guide into the opening and slide the quilt
1
guide to the position according to the desired space
between seams.
2
Sewing
Sew while tracing the previous seam with the quilt guide.
1
1
D1 (Utility)
AUTO
Zigzag foot A or dual feed foot AD
7
1 Opening on the foot holder
2 Quilt guide
3 Space between seams

Straight Stitch Needle Plate

The small needle entry hole on the plate prevents
puckering and skipped stitches on fabrics when
straight stitch sewing (center needle position only).
How to attach straight stitch needle plate
Press the "Up/Down Needle" button until the needle is
in an up position. Raise the presser foot.
Turn OFF the power switch. Remove the presser
foot and needle. Remove the screws in the needle plate.
1 Screw
Remove the standard needle plate. Position the
straight stitch needle plate. Replace the screws.
Turn ON power switch.
Place fabric under presser foot. Check that needle
is in center position. Lower presser foot and sew.
CAUTION:
Only use a straight stitch in center needle
position. Any stitch with sideways movement
(Example: zigzag) will cause the needle to break because
it will hit the plate.
72