Individually Adjusting Stitch Width Or Length - ELNA eXcellence 740 Manual

z
x
c
v
b
(A) (B) (C) (D)
97

Individually Adjusting Stitch Width or Length

If the cursor is positioned under a stitch in the
programmed sequence, the stitch width or length
adjustment is applied only to that stitch.
z Program 133 two times.
x Press "Edit Left" key to move cursor.
c Press "–" on "Stitch Width Adjusting" key.
v Press "–" on "Stitch Length Adjusting" key.
b Place fabric and stabilizer under foot and sew.
NOTE: If the cursor is to the right of the last stitch
in the sequence and either the "Stitch Width/ Adjusting"
key or "Stitch Length Adjusting" key is pressed then
all individually adjusted settings will be replaced
with the uniformly adjusted setting.
Alignment of Stitches Within a Sequence
Often stitches in a sequence have different needle
start positions – left, center or right. Your machine
will automatically determine a common alignment
point based on the stitches in the sequence. There
are 4 possibilities:
(A) Left and center needle positions are aligned to left.
(B) Right and center needle positions are aligned to right.
(C) Left and right needle positions are aligned to center.
(D) Left, center and right needle positions are aligned
to center.