Selecting The Patterns - ELNA eXcellence 740 Manual

2
6
7
8
1
4
3
5
9

Selecting the Patterns

The stitch patterns are classified into 10 groups.
To select the desired stitch pattern, refer to the reference
chart inside the top cover to identify the stitch group and
pattern number.
When turning the power switch on, the LCD screen will
show the straight stitch D1 selected.
Press the mode key and the group selection window will
open.
1 Mode key
2 Group selection window
Turn the jog dial clockwise or counterclockwise to browse
through the groups.
3 Jog dial
NOTE:
To close the group selection window, press the cross
mark with the touch panel stylus.
4 Cross mark
Press the confirm button in the center of the jog dial to
select the group enclosed with a frame, or press the icon
of the desired group with the touch panel stylus.
5 Confirm button
6 Touch panel stylus
The pattern selection window will open.
Turn the jog dial and press the confirm button, or press
the stitch icon to select the desired stitch pattern.
The LCD screen will display the pattern number and stitch
image, along with information such as stitch width and
length, recommended foot, foot pressure and tension
setting.
7 Stitch image
8 Pattern number
9 Information
NOTE:
A message window will be displayed for briefly when
certain stitch pattern is selected.
CAUTION:
Do not press the surface of the LCD screen with hard or
sharp objects like pencils, screwdrivers or the like. Use
the touch panel stylus to press the LCD screen.
15