ELNA eXcellence 740 Manual page 71

1
Sewing a shorter darning
To sew a darning shorter than 2 cm (3/4"), first stop the
machine after sewing the required length, then press the
reverse button.
The required length has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
1 Required length
2 Reverse button
2
Sewing the same size darning
Simply start the machine to sew another darning at the
same size.
To sew the darning at a different size
Press the memory key
beginning.
Adjusting the evenness of darning
The evenness of darning may vary depending on the
sewing conditions, such as type of fabrics, number of
layers etc. You can correct the unevenness of darning
with the stitch length adjusting key.
If the left corner is lower than the right side, press on "–"
to correct it.
If the right corner is lower than the left side, press on "+"
to correct it.
NOTE:
The evenness can be adjusted within d1 to d9
(default setting is d5).
67
and start sewing from the