Table of Contents
Advertisement
q
w
e
z
x
c
q
w
t
e
r
y
u
Selecting the Patterns
The stitch patterns are classified into 11 groups and
monogramming.
To select the desired stitch pattern, refer to the reference
chart inside the top cover to identify the stitch group and
pattern number.
q The stitch patterns that start with "D" (for example, D1,
D2 or D94) can be sewn with the upper feed foot AD.
w The stitch patterns end with "S" (D1S, D2S, D3S, D4S,
D97S or D98S) can be sewn with the straight stitch
needle plate.
e The stitch patterns shaded with light blue can be
turned over vertically (refer to page 88).
NOTE:
When the straight stitch needle plate is attached to
the machine, the patterns not suitable for the straight
stitch needle plate cannot be selected.
z When turning the power switch on, the LCD screen
will show the straight stitch D1 selected.
Press the mode key and the group selection window
will open.
q Mode key
w Group selection window
x Turn the jog dial or press the edit key to browse
through the groups.
e Jog dial
r Edit key
NOTE:
To close the group selection window, press the cross
mark with the touch panel stylus.
t Cross mark
c Press the confirm button in the center of the jog dial to
select the group enclosed with a frame, or press the
icon of the desired group with the touch panel stylus.
y Confirm button
u Touch panel stylus
25
Advertisement
Table of Contents
