Section 3. Advanced Operation With The Rcs Unit; Selecting The Embroidery Patterns; Rcs Unit Selecting The Embroidery Patterns - ELNA expressive 940 Instruction Manual

Keep hand clear.
Carriage will now move to set position.
Resume last pattern?
q
r
1 2 3 4
5 6 7 8
9 10 11 12
SECTION 3. ADVANCED OPERATION
WITH THE RCS UNIT

Selecting the Embroidery Patterns

When turning the power on, the LCD touch panel will
show the opening window, then a warning message
will appear after a few seconds.
q
Press the OK key and the carriage will move to the
home position. Keep your hands clear of the moving
parts.
q OK key
The LCD touch panel will show a prompt asking you
to resume the last pattern or not.
Press the OK key, if you wish to continue sewing the
w
last pattern used before you turned the power off.
Or press the exit (X) key to start a new job.
w Exit key (X)
e
When you press the exit (X) key, the LCD touch panel
will show the pattern selection window of the built-in
designs.
To select the monogramming or editing mode, press
the circle key next to the monogram or editing icon.
e Circle key (monogramming)
r Circle key (editing)
In the monogramming mode, you can select 10 styles
of font, 2-letters, 3-letters and border patterns.
In the editing mode, you can modify and combine
embroidery patterns imported from various sources
including the built-in designs, PC-Design cards,
CD-ROM and free design form Internet.
36