Individually Adjusting Stitch Width Or Length; Alignment Of Stitches Within A Sequence - ELNA eXperience 660 Instruction Manual

q
w
e
r
t
q w e r

Individually Adjusting Stitch Width or Length

If the cursor is positioned under a stitch in the
programmed sequence, the stitch width or length
adjustment is applied only to that stitch.
q
Program 046 two times.
w
Press "Review Memory Left" key to move cursor.
e
Press "–" on "Stitch Width/Needle Position" key.
r
Press "–" on "Stitch Length" key.
t
Place fabric and stabilizer under foot and sew.

Alignment of Stitches Within a Sequence

Often stitches in a sequence have different needle start
positions – left, center or right. Your machine will
automatically determine a common alignment point
based on the stitches in the sequence. There are 4
possibilities:
q
Left and center needle positions are aligned to left.
w
Right and center needle positions are aligned to right.
e
Left and right needle positions are aligned to center.
r
Left, center and right needle positions are aligned to
center.
38