How To Alter Buttonhole Stitch Width And Length; Reinforced Buttonhole Ooo; Ccc Cee Ttceeseceseeeeneeees - ELNA EnVision 8006 Instruction Manual

|
AAA
©
Fm AANA
8 FL
Baleye) | TCE
34
Sensor Buttonholes (cont'd)
If the button is extremely thick and difficult to fit
through the test buttonhole, you can lengthen the
buttonhole by pulling the button holder on the foot
back a little extra. The length of the buttonhole will
increase by that same amount.
@ Button holder
@® Slider
@ There should be no gap.
@ Spring holder
© Incorrect buttonhole
Make sure there is no gap between the slider and
spring holder. If there is a gap, the sides of the
buttonhole will be different lengths (©).
How to Alter Buttonhole Stitch
Width and Length
Press the key.
The pre-programmed stitch settings are shown on the
screen.
Press the (_— ) or key to alter the buttonhole
© Narrow width
@ Wider width
Shorter stitch
) Longer stitch
Press the key to return the display to Screen B.
Reinforced Buttonhole
There is another method for changing the density of
the classic and keyhole buttonholes besides
shortening stitch length.
Press the key before sewing starts. Sew, using
same procedure as sensor buttonhole. The machine
will automatically sew over the buttonhole twice and
stop. The result is a reinforced buttonhole.
(0) Reinforced buttonhole key