Memory Scanning (M-Scan); Priority Scanning (P-Scan) - Standard Horizon INTREPID + GX1270S Owner's Manual

5.8 MEMORY SCANNING (M-SCAN)

• During scanning, the dot matrix area of the LCD will show M-SCAN or
P-SCAN depending on the scan mode selected.
• If position is displayed this icon will be hidden.
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the UP or DOWN key.
Press and hold the SCAN key, MEM will appear on the LCD which
programs the channel into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver's memory, press and
hold the SCAN key, MEM will disappear in the LCD.
5. To start scanning, press the SCAN key. Scanning will proceed from
the lowest to the highest programmed channel number and will stop
on a channel when a transmission is received.
BUSY HI USA
M–SCAN
VTS
7. To stop scanning, press the SCAN, 16/9, WX, or PTT key.

5.9 PRIORITY SCANNING (P-SCAN)

1. The priority channel is set to channel 16..
MEM HI USA
P–SCAN CH16
MEM CH.
GX1270S
NOTE
6. The received channel number will blink during
busy stop.
A
2. For priority scanning during M-SCAN, press and
hold the SCAN key, until P-SCAN appears in
the LCD. Scanning will proceed between the
A
memorized channels and the priority channel.
The priority channel will be scanned after each
programmed channel
CH. 16 CH. 70
(When DSC scaning
is available)
Owner's Manual
MEM CH. CH. 16 CH. 70
(When DSC scaning
is available)
page 16