Ch Naming - Standard Horizon INTREPID + GX1270S Owner's Manual

CONTRAST
5
4. Press the CALL/SET key to store the selected level.
The LCD will return to the SETUP menu.

7.4 CH NAMING

1. To select USA, INT or CANADA, press and hold the 16/9 key and
press WX key.
LAMP ADJUST
CONTRAST
>CH NAME
INDIV DIR
CH NAME USA
PORT OPR
CH NAME USA
PORT OPR
CH NAME USA
VERTEX
7. To enter the name, press the CALL/SET key for 1 second or more.
CH NAME USA
>NEXT
EXIT
page 35
3. Press the UP or DOWN key to select the desired
level. (Example: 5 is selected)
The contrast is stronger as the selected level increases.
A
2. Select CH NAME in the SETUP menu (press
and hold the CALL/SET key) with the UP or
A
DOWN key.
3. Press the CALL/SET key.
4. Press the UP or DOWN key to select the
channel to be named and press the CALL/SET
key.
5. Press the UP or DOWN key scroll through the
alphabet and 0 - 9.
6. Press the CALL/SET key to enter the desired
letter and move the cursor one space to the right.
Repeat procedure until the name is complete.
The name can consist of up to twelve characters,
if you do not use all twelve character press the
CALL/SET key to move to the next space. If you
clear the previous letter, press the H/L key.
8. If you want to enter the name of another
channel, select NEXT and press the CALL/SET
key. Repeat steps 2 through 6.
To return the Setup menu, select EXIT and
press the CALL/SET key.
Owner's Manual GX1270S