Sending A Dsc Telephone Call; Operation Of Telephone Call - Standard Horizon INTREPID + GX1270S Owner's Manual

6.6 SENDING A DSC TELEPHONE CALL

This feature allows the user to transmit a DSC telephone call automatically
to a telephone (marine operation) coast station. To use DSC Telephone
Call function, Telephone ID has to be set as 7.6 Telephone ID Setup.
Refer to Owner's supplement manual for Telephone Call detail.
6.6.1

Operation of Telephone Call

>INDIVIDUAL
GROUP
ALL SHIPS
TELEPHONE
INDIVIDUAL
GROUP
ALL SHIPS
>TELEPHONE
TOM
>MIKE
BOB
DICK
TX HI USA
TELEPHONE
MIKE
TX HI USA
MIKE
WATING
HI USA
TELEPHONE
MIKE
>END CALL
TX HI USA
TELEPHONE
MIKE
TELEPHONE
CALL FINISHED
ELPSD TIME
00 : 03 : 25
page 25
1. Press the CALL/SET key.
The DSC CALLING menu will appear.
A
2. Press the UP or DOWN key to select
TELEPHONE.
A
3. Press the CALL/SET key.
4. Press the UP or DOWN key to select telephone
name you want to contact.
A
5. Press the CALL/SET key.
When the Telephone call signal is sent, the dot-
matrix area of the LCD will be as shown in the
illustration on the left.
6. When the transceiver receives the telephone
call starting signal, the channel is switched to
telephone call channel and the alarm will sound.
If you receive no acknowledgment signal, refer
to 6.6.2 Resend Telephone Call Signal. If you
receive Busy signal, refer to 6.6.3 Resend
Telephone Call When Receive Busy Signal.
7. To end Telephone Call, press the CALL/SET
key.
8. When the transceiver has received the telephone
call ending signal, the transceiver is switched
previous channel and the elapsed time will be
shown as the illustration on the left.
If no elapsed time data is received, "– – : – – : – –"
will be shown.
Owner's Manual GX1270S