Receiving An Individual Call; Receiving A Position Request - Standard Horizon INTREPID + GX1270S Owner's Manual

6.11.5 Receiving an individual call

When receiving an individual call, an acknowledgment must be sent back
to the calling station.
INDIVIDUAL
BOB
JUN15 4:00P
2. Press any key to stop the alarm.
3. Press the PTT on the mic and talk to the calling ship.

6.11.6 Receiving a position request

When a position request call is received from another vessel, a calling
alarm will sound and POS REQUEST will show in the LCD. Operation
and transceiver function differs depending on the SET UP POS REPLY
mode setting.
Automatically reply:
POS REQUEST
JIM
JUN15 7:00P
2. To exit from position request display, press any key.
Manually reply:
POS REQUEST
JIM
>REPLY
EXIT
POS REQUEST
JIM
>REPLY
EXIT
3. When REPLY is selected, press the CALL/SET key. And the
requested position coordinates will be transmitted.
4. To exit from position request display, press any key.
page 33
1. An individual call is received. An individual call
alarm sounds. Then the radio automatically
switches to the requested channel.
1. When a position request call is received, a
calling alarm sounds 4 times. Then requested
A
p o s i t i o n c o o r d i n a t e s a r e t r a n s m i t t e d
automatically.
1. When a position request call is received, the
LCD will be as shown in the illustration on the
left.
A
2. A calling alarm sounds 4 times. Then select type
of reply function REPLY or EXIT by using the
UP or DOWN key.
A
Owner's Manual GX1270S