Scan Memory Programming; Memory Scanning ( M-Scan ) - Standard Horizon Eclipse GX1300 Owner's Manual

8.7.2 Scan Memory Programming

1. Press the MENU key to display the menu.
2. Select " SETUP " with the ▲ / ▼ / ◄ / ► keys,
then press the
3. Press the ▲ / ▼key to select " C H A N N E L
SETUP ", then press the
4. Press the ▲ / ▼ key to select " SCAN MEMORY ",
then press the
5. Press the ▲ / ▼ key to select a desired
channel to be scanned, then press the
soft key. " MEM " appears on the display, which
indicates the channel has been selected to the
scan channel.
6. Repeat step 5 for all the desired channels to
be scanned.
7. To delete a channel from the list, select the
channel then press the
The " MEM " disappears from the display.
BACK
8. Press the
Priority Channel can be set for each Channel Group.

8.7.3 Memory Scanning ( M-SCAN )

1. Adjust the SQL knob until background noise disappears.
2. Select " MEMORY SCAN " as scan type via the SETUP menu.
3. Press one of the soft keys, then press the
soft key (it may be necessary to press the ◄
/ ► key to locate the
appears on the LCD. Scanning will proceed
from the lowest to the highest programmed
channel number and will stop on a channel
when a transmission is received.
4. The channel number will blink during recep-
tion.
5. To stop scanning, press the 16/S key or press one of the soft keys, then
SCAN
press the
GX1300
SELECT
soft key.
SELECT
SELECT
soft key.
MEM
soft key again.
soft key to exit the menu.
SCAN soft key). " M-SCN "
soft key.
soft key.
MEM
NOTE
SCAN
BACK SELECT
SETUP
DSC SETUP
CHANNEL SETUP
CONFIGURATION
BACK SELECT
CHANNEL SETUP
WEATHER ALERT
MULTI WATCH
SCAN MEMORY
SCAN TYPE
BACK SELECT
SCAN MEMORY
CH: 16 MEM
CH: 17 MEM
CH: 18A
CH: 19A MEM
BACK MEM
16
BUSY
25W
P
USA
M-SCN
Page 29
MEM
A
C