Voice Scrambler - Standard Horizon INTREPID + GX1270S Owner's Manual

7.8 VOICE SCRAMBLER

1. Press and hold the CALL/SET key until the SETUP menu is
displayed.
CH NAME
INDIV DIR
POS REPLY
>SCRAMBLER
>CODE
CHANNEL
ON
OFF
4. Select CODE in the SCRAMBLER SETUP menu and press the
CALL/SET key.
CODE
0
6. Press the CALL/SET key to store the selected code.
The LCD will return the SCRAMBLER SETUP menu.
CODE
>CHANNEL
ON
OFF
CHANNEL
MEM
CHANNEL
CODE
CHANNEL
>ON
OFF
This menu will not appear unless the CVS2500 is installed.
page 39
2. Select SCRAMBLER in the SETUP menu with
the UP or DOWN key.
A
3. Press the CALL/SET key.
The scrambler setup menu will appear.
5. Press the UP or DOWN key to change the
scrambler code.
The scrambler code can be set from 0 to 3.
7. Select CHANNEL in the SCRAMBLER SET UP
menu and press the CALL/SET key.
8. Press the UP or DOWN key to change the
scrambled channel.
9. Press the CALL/SET key to store the selected channel.
Repeat steps 8 and 9 to set other channels.
10. Press and hold down the CALL/SET key to exit
from the channel select menu.
The LCD will return the SCRAMBLER SETUP
menu.
11. Select ON to use the scrambler operation and
press the CALL/SET key.
The LCD will return the SETUP menu.
NOTE
Owner's Manual GX1270S