Maintenance; Replacement Parts - Standard Horizon INTREPID + GX1270S Owner's Manual

10
The inherent quality of the solid-state components used in this transceiver
will provide many years of continuous use. Taking the following
precautions will prevent damage to the transceiver.
Keep the microphone connected or the jack covered at all times to
*
prevent corrosion of electrical contacts;
* Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
* Ensure that the supply voltage to the transceiver does not exceed 16
VDC or fall below 11 VDC.
Use only STANDARD HORIZON-approved accessories and
*

replacement parts.

In the unlikely event of serious problems, please contact your Dealer or
our repair facility. Address and phone numbers for this facility, as well as
warranty information, are contained in your Owner's Manual Supplement.
10.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling:
Marine Division of Vertex Standard
US Headquarters
17210 Edwards Rd., Cerritos, CA 90703
Commonly requested parts, and their part numbers are listed below.
Microphone, White (CMP351W) ................................ MP51000400
Microphone, Black (CMP351B) .................................. MP51000410
RAM Microphone Connector Cover ........................... 389B053010
Mounting Bracket, White ............................................ 444X160030
Mounting Bracket, Black ............................................ 444X160130
Mounting Bracket Knob, White .................................. 444X154030
Mounting Bracket Knob, Black ................................... 444X154130
Volume Control Knob ................................................. 443X154500
Squelch Control Knob ................................................ 443X154500
Accessory Cable ........................................................ ZD00600110
Power Cord ................................................................ ZC01300010
Mic Hanger, White ...................................................... 277X155020
Mic Hanger, Black ...................................................... 277X155120
Dust Cover ................................................................. DC-17
Distress Cover with spring ......................................... 02AX053040
page 55 Owner's Manual

MAINTENANCE

GX1270S