Prepare The Library - Spectra Logic Spectra 64K Installation Manual

Library stability kit

Hide thumbs Also See for Spectra 64K:

Table of Contents

Prepare the Library

Note:

The leveler feet on the library must be lowered, raising the library

off of its rollers.

If you cannot access the leveler feet, you must remove the side

panels. Proceed to Remove the Side Panels on page 10.

Remove the Front and Rear Kick Plates

1. Both the front and rear kick plates snap in and out of place; no tools are required to

remove them.

Locate the front kick plate and pull it off (Figure 2).

Spectra 64K Library Stability Kit Installation Procedure

Figure 2 Remove the front kick plate.

Table of Contents

Do you have a question about the Spectra 64K and is the answer not in the manual?