Spectra Logic Spectra 64K Installation Manual page 11

Library stability kit

Hide thumbs Also See for Spectra 64K:

Table of Contents

2. Use a #3 Phillips screwdriver to remove the four screws that attach the sides to the

library chassis (Figure 7).

Figure 7 Remove four screws attaching the side panels to the library chassis.

3. After the screws have been removed, the side panels are still snapped into place.

Pull off each side panel and set it aside for later replacement.

4. Return to Remove the Front and Rear Kick Plates on page 6 to complete the

procedure.

Spectra 64K Library Stability Kit Installation Procedure

Table of Contents

Need help?

Do you have a question about the Spectra 64K and is the answer not in the manual?