Attach Brackets - Spectra Logic Spectra 64K Installation Manual

Library stability kit

Hide thumbs Also See for Spectra 64K:

Table of Contents

Attach Brackets

1. Use a #3 Phillips screwdriver and four of the screws provided to attach two

brackets to the front of the library (Figure 5).

Figure 5 Attach front brackets.

2. Use a #3 Phillips screwdriver and the remaining four screws provided to attach two

brackets to the rear of the library.

3. Proceed to Finish on page 12.

Spectra 64K Library Stability Kit Installation Procedure

Table of Contents

Do you have a question about the Spectra 64K and is the answer not in the manual?