Installing options
Exploded view of the xSeries 340 server
© Copyright IBM Corp. 2000
This chapter provides instructions to help you add options to your server. Some
option-removal instructions are provided, in case you need to remove one option to
install another.
The orange color on components and labels in your server identifies hot-swap or hot-
plug components. This means that you can install or remove the components while
the system is running, provided that your system is configured to support this
function. For complete information about installing or removing a hot-swap or hot-
plug component, see the information provided in the detailed procedures in this
document under "Installing a hot-swap drive" on page 52.
The blue color on components and labels indicates touch points where a component
can be gripped, a latch moved, and so on.
c 1 d
Slim HDD bezel filler assembly
c 2 d
Hard disk drive tray
c 3 d
Power Supply
c 4 d
Filler panel for the power supply bay
c 5 d
Filler panel for the device bay
c 6 d
System board
c 7 d
Terminator Card
c 8 d
DIMM
c 9 d
Microprocessor
39