Chapter 3. Installing internal options
Removing the cover
Removing the power supply
© Copyright IBM Corp. 2001
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When adding an option, use these instructions along with the instructions
that come with the option.
Important:
Read "Safety Information" on page vii and "Chapter 1. Overview," on page 1
before removing the cover.
To remove the cover:
1.
Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2.
Unplug all power cords from electrical outlets.
3.
Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4.
Remove three screws that secure the cover panel, and slide the cover panel
toward the rear of the computer.
To access the system board, you need to remove the power supply. You can also
remove the power supply for easier installation of internal drives and adapters.
15