Table of Contents
Advertisement
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the
jack on the console and into a jack on your personal
audio player; make sure that the audio cable is fully
plugged in. Note: To purchase an audio cable, see
your local electronics store.
Next, press the play button
on your personal audio
player. Adjust the volume
level using the volume
increase and decrease
buttons on the console or
the volume control on your personal audio player.
THE SETTINGS MODE
The console features a settings mode that keeps track
of treadmill usage information and allows you to select
a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button. Then,
release the Stop button. Note: If a workout has been
selected, you may have to press the Stop button twice
to exit the workout before you can access the informa-
tion mode. When the information mode is selected, the
following information will be shown:
An "E" for English miles or an "M" for metric kilometers
will appear in the display. Press the Speed increase or
decrease button to change the unit of measurement, if
desired.
To exit the information mode, remove the key from the
console, or press the Stop button repeatedly.
23
Advertisement
Table of Contents
