Table of Contents
Advertisement
Quick Links
proform.com
Model No. PFTL79515.5
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to my.proform.com.
CUSTOMER CARE
For service at any time, go to
proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for ICON PFTL79515.5
Summary of Contents for ICON PFTL79515.5
- Page 1 Model No. PFTL79515.5 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com.
-
Page 2: Table Of Contents
Note: The decals may not be shown at actual size. IFIT is a registered trademark of ICON Health & Fitness, Inc. App store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc. The BLUETOOTH ®... -
Page 3: Important Precautions
To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 4 19. Always stand on the foot rails when starting TREADMILL on page 25.) You must be able or stopping the walking belt. Always hold the to safely lift 45 lbs. (20 kg) to raise, lower, or handrails while using the treadmill. move the treadmill.
- Page 5 STANDARD SERVICE PLANS...
-
Page 6: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this PROFORM ® PERFORMANCE 600I treadmill. The manual. To help us assist you, please note the product PERFORMANCE 600I treadmill offers an impres- model number and serial number before contacting us. -
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 8: Assembly
ASSEMBLY • To hire an authorized service technician to • Left parts are marked “L” or “Left” and right parts assemble the treadmill, call 1-800-445-2480 are marked “R” or “Right.” • Assembly requires two persons. • To identify small parts, see page 7. •... - Page 9 2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (81) to the front of the Base (94). Next, identify the Right Upright (90). Have a sec- ond person hold the Right Upright near the Base (94).
- Page 10 4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). Attach the Right Upright (90) and a Wheel (97) with two 3/8" x 2 1/4" Screws (7), a 3/8" x 1 1/4" Screw (63), a 3/8"...
- Page 11 6. Identify the Left Handrail (86). Attach the Left Handrail (86) to the Left Upright (89) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); firmly tighten the Screws. Next, attach the Right Handrail (87) to the Right Upright (90) with two 5/16"...
- Page 12 8. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (56) to the upright position. IMPORTANT: Do not raise the Frame past the vertical position. Have a second person hold the Frame until step 10 is completed.
- Page 13 10. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4" Bolt (3) from the bracket on the Latch Crossbar (38). 12 I Align the upper end of the Storage Latch (53) with the bracket on the Latch Crossbar (38), and insert the 5/16"...
- Page 14 12. Attach the console assembly (J) to the Left and Right Handrails (86, 87) with four #10 x 3/4" Screws (9) and four #10 Star Washers (5); start all four Screws, and then tighten them. 13. See the inset drawing. Connect the Upright Wire (81) to the console wire (K).
- Page 15 14. Attach the Left Handrail Cover (79) and the Right Handrail Cover (92) to the Left and Right Handrails (86, 87) with six #8 x 1/2" Screws (1); start all the Screws, and then tighten them. Do not overtighten the Screws. 15.
- Page 16 17. Press the two tabs on the Tablet Holder (105) into the slots (L) in the console assembly (J). Attach the Tablet Holder (105) with four #8 x 5/8" Machine Screws (26). Note: Start the two top Start First Machine Screws fi rst, and then start the two bottom Machine Screws.
-
Page 17: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- Use a Surge Suppressor power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit. - Page 18 CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s sound system while you IMPORTANT: To activate your console and begin exercise. using its exclusive features, see assembly step 18 on page 16.
- Page 19 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
- Page 20 If you press 8. Turn on the fan if desired. the scan icon, the console will continuously cycle through all information. The fan features several speed settings. Press the As you exercise, the power ring will indicate fan buttons repeatedly to the approximate intensity level of your exercise.
- Page 21 9. When you are fi nished exercising, remove the Each workout is divided into segments. One speed key from the console. setting and one incline setting are programmed for each segment. Note: The same speed setting and/ Step onto the foot rails, press the Stop button or incline setting may be programmed for consecu- repeatedly, and adjust the incline of the treadmill tive segments.
- Page 22 HOW TO USE AN INTERVAL TRAINING WORKOUT 7. Measure your heart rate if desired. During an interval training workout, you will repeatedly See step 7 on page 20. alternate between intervals of low-intensity “recovery” exercise and intervals of high-intensity “work” exercise. 8.
- Page 23 3. Connect your tablet to the console. HOW TO CONNECT YOUR HEART RATE MONITOR TO THE CONSOLE Press the Bluetooth button on the console; the console pairing number will appear in the display. The console is compatible with all BLUETOOTH Smart Then, follow the instructions in the iFit Bluetooth heart rate monitors.
-
Page 24: Fcc Information
THE INFORMATION MODE HOW TO USE THE TABLET HOLDER The console features an information mode that keeps IMPORTANT: The tablet holder is designed for use track of treadmill usage information and allows you to with most full-size tablets. Do not place any other select a unit of measurement for the console. -
Page 25: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left. -
Page 26: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal perfor- as shown, the switch has tripped. To reset the mance and to reduce wear. Inspect and properly tighten power switch, wait for fi... - Page 27 SYMPTOM: The incline of the treadmill does not c. Your treadmill features a walking belt coated with change correctly high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to a. Hold down the Stop button and the Speed increase the walking belt or the walking platform unless button, insert the key into the console, and then instructed to do so by an authorized service...
- Page 28 b. If the walking belt slips when walked on, fi rst SYMPTOM: The tablet holder does not stay in place remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. Rotate the tablet holder backwards. Then, tighten screws clockwise, 1/4 of a turn.
-
Page 29: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 30: Part List
PART LIST Model No. PFTL79515.5 R1217A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw #8 x 1/2" Washer Head Screw #8 x 3/4" Screw 9/32" Plastic Bushing Storage Latch 5/16" x 2 1/4" Bolt Drive Motor 5/16"... - Page 31 Key No. Qty. Description Key No. Qty. Description Left Inner Base Cover 1/4" x 1 1/4" Screw #8 x 3/4" Truss Head Screw 1/4" Nut Power Cord Grommet M5 Washer – User’s Manual Tablet Holder Note: Specifi cations are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
-
Page 32: Exploded Drawing
EXPLODED DRAWING A Model No. PFTL79515.5 R1217A... - Page 33 EXPLODED DRAWING B Model No. PFTL79515.5 R1217A...
- Page 34 EXPLODED DRAWING C Model No. PFTL79515.5 R1217A...
- Page 35 EXPLODED DRAWING D Model No. PFTL79515.5 R1217A...
-
Page 36: Ordering Replacement Parts
This warranty extends only to the original purchaser (customer) and is not transferrable. ICON’s obliga- tion under this warranty is limited to repairing or replacing, at ICON’s option, the product through one of its authorized service providers. All repairs for which warranty claims are made must be preauthorized by ICON.