ICON PRO-FORM 6.0 RT User Manual
  1. Manuals
  2. Brands
  3. ICON Manuals
  4. Treadmill
  5. PRO-FORM 6.0 RT
  6. User manual

ICON PRO-FORM 6.0 RT User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.proform.com
Model No. PFTL39511.8
USER'S MANUAL
Serial No.
Write the serial number in the space
above for reference.
Serial
Number Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to www.proformservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO-FORM 6.0 RT and is the answer not in the manual?

Questions and answers

Related Manuals for ICON PRO-FORM 6.0 RT

Summary of Contents for ICON PRO-FORM 6.0 RT

  • Page 1 www.proform.com Model No. PFTL39511.8 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.proformservice.com/ registration. CUSTOMER CARE For service at any time, go to www.proformservice.com.

  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. PROFORM is a registered trademark of ICON Health & Fitness, Inc.

  • Page 3: Important Precautions

    To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
  • Page 4 20. Keep fingers, hair, and clothing away from 25. When folding or moving the treadmill, make the moving walking belt. sure that the storage latch is holding the frame securely in the storage position. 21. The treadmill is capable of high speeds. Adjust the speed in small increments to 26.
  • Page 5 STANDARD SERVICE PLANS...

  • Page 6: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the new PROFORM ® 6.0 RT manual. To help us assist you, note the product model treadmill. The 6.0 RT treadmill provides an impressive number and serial number before contacting us. The selection of features designed to make your workouts model number and the location of the serial number at home more effective and enjoyable.

  • Page 7: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.

  • Page 8: Assembly

    ASSEMBLY • To hire a service technician to assemble this prod- • Left parts are marked “L” or “Left” and right parts uct in your home, call 1-800-445-2480. are marked “R” or “Right.” • Assembly requires two persons. • To identify small parts, see page 7. •...
  • Page 9 3. Locate the Upright Wire (63) bundled between the Base (74) and the Belly Pan (52). Remove all ties securing the Upright Wire. Route the Upright Wire into the Base and out of the indi- cated hole. Press a Base Cap (70) into each side of the Base (74) (only one side is shown).
  • Page 10 5. Hold the Right Upright (33) against the Base (74). Be careful not to pinch the Upright Wire (63). Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star Washer (3) into the top hole in the Right Upright (33).
  • Page 11 8. Remove and discard the four indicated screws (D). 9. Attach the Console Crossbar (61) to the Right and Left Uprights (33, 66) with four #10 x 3/4" Screws (8) and four #10 Star Washers (23); start all four Screws, and then tighten them. Firmly tighten the two 5/16"...
  • Page 12 10. With the help of a second person, hold the con- sole assembly near the Right Handrail (64). See the inset drawing. Connect the Upright Console Wire (63) to the console wire. The connectors Assembly should slide together easily and snap into place.
  • Page 13 12. Make sure that the knob on the Latch Assembly (67) is on the indicated side. Attach the Latch Assembly (67) to the Left Upright (66) with two #10 x 3/4" Screws (8) ; start both Screws, and then tighten them. Knob 13.

  • Page 14: How To Use The Treadmill

    HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’s...
  • Page 15 CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 16. To use the manual mode, see page 16. To use a preset work- The treadmill console offers a selection of features out, see page 18. To use the information mode, designed to make your workouts more effective and see page 19.
  • Page 16 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
  • Page 17 4. Change the incline of the treadmill as desired. Press the Priority Display button repeatedly until the upper display shows the information that you To change the incline of the treadmill, press the are most interested in viewing. Note: While infor- Incline increase and decrease buttons or one of mation is shown in the upper display, the same the numbered Quick Incline buttons.
  • Page 18 HOW TO USE A PRESET WORKOUT At the end of each segment, a series of tones will sound and the next segment of the profi le will begin 1. Insert the key into the console. to fl ash. If a different speed and/or incline setting is programmed for the next segment, the speed and/ See HOW TO TURN ON THE POWER on page 16.
  • Page 19 THE INFORMATION MODE HOW TO USE THE SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the console track of treadmill usage information and allows you to sound system while you exercise, plug a 3.5 mm male select a unit of measurement for the console.

  • Page 20: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, adjust the incline to Before moving the treadmill, fold it as described at the zero. If you do not do this, you may damage the left.

  • Page 21: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by follow- SYMPTOM: The power turns off during use ing the simple steps below. Find the symptom that applies, and follow the steps listed. If further assis- a. Check the power switch (see drawing c at the left). tance is needed, see the front cover of this manual.
  • Page 22 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifi cations described on page 14. a. If the walking belt is off-center, fi rst remove the key and UNPLUG THE POWER CORD.

  • Page 23: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 24: Part List

    PART LIST Model No. PFTL39511.8 R1214A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Ground Screw Walking Platform 3/8" x 3 1/4" Screw Walking Belt 3/8" Star Washer Right Foot Rail #8 x 3/4" Screw Idler Roller 5/16"...

  • Page 25: Exploded Drawing

    EXPLODED DRAWING A Model No. PFTL39511.8 R1214A...
  • Page 26 EXPLODED DRAWING B Model No. PFTL39511.8 R1214A...
  • Page 27 EXPLODED DRAWING C Model No. PFTL39511.8 R1214A...

  • Page 28: Ordering Replacement Parts

    ICON’s option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to a service center, freight charges to and from the service center will be the customer’s responsibility. If replacement parts are shipped while the product is under warranty, the customer will be responsible for a minimal handling charge.

This manual is also suitable for:

Pftl39511.8

Table of Contents