Table of Contents
Advertisement
Quick Links
proform.com
Model No. PFTL14018.1
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to my.proform.com.
CUSTOMER CARE
For service at any time, go to
proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for ICON PFTL14018.1
Summary of Contents for ICON PFTL14018.1
- Page 1 Model No. PFTL14018.1 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com.
-
Page 2: Table Of Contents
Note: The decals may not be shown at actual size. 305284 PROFORM and IFIT are registered trademarks of ICON Health & Fitness, Inc. App store is a trademark of Apple Inc., registered in the U.S. and other countries. The BLUETOOTH word mark and logos are registered ®... -
Page 3: Important Precautions
To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 4 19. Always stand on the foot rails when starting able to safely lift 45 lbs. (20 kg) to move the or stopping the walking belt. Always hold the treadmill. handrails while using the treadmill. 26. When folding or moving the treadmill, make 20.
- Page 5 STANDARD SERVICE PLANS...
-
Page 6: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM reading this manual, please see the front cover of this ® TRAINER 12.0 treadmill. The TRAINER 12.0 treadmill manual. To help us assist you, please note the product offers an impressive selection of features designed model number and serial number before contacting us. -
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 8: Assembly
ASSEMBLY • To hire an authorized service technician to • Left parts are marked “L” or “Left” and right parts assemble the treadmill, call 1-800-445-2480. are marked “R” or “Right.” • Assembly requires two persons. • To identify small parts, see page 7. •... - Page 9 2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (83) to the front of the Base (93). Next, identify the Right Upright (84). Have a sec- ond person hold the Right Upright near the Base (93).
- Page 10 4. Hold the Right Upright (84) against the Base (93). Make sure not to pinch the Upright Wire (83). Attach the Right Upright (84) with two 3/8" x 2 3/4" Screws (23), two 3/8" x 1 1/4" Screws (20), and four 3/8" Star Washers (25) as shown; do not fully tighten the Screws yet.
- Page 11 6. Attach the two Handrails (74) to the Right and Left Uprights (84, 91) with the four 5/16" x 2" Screws (2) that you removed in step 5 and four 5/16" Star Washers (8); start all four Screws, and then tighten them. Be careful not to pinch the Upright Wire (83) on the right side.
- Page 12 8. See the inset drawing. Connect the Upright Wire (83) to the console wire (H). The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER.
- Page 13 10. IMPORTANT: To avoid damaging the Pulse Bar (80), do not use power tools, and do not overtighten the #10 x 3/4" Screws (6) or the 1/4" x 5/8" Screws (99). Tighten two 1/4" x 5/8" Screws (99) with two 1/4" Star Washers (77), and two #10 x 3/4"...
- Page 14 12. Attach the Left Handrail Bottom Cover (75) to the left Handrail (74) with two #8 x 3/4" Truss Head Screws (24); start both Truss Head Screws, and then tighten them. Be careful not to over- tighten the Truss Head Screws. Attach the Right Handrail Bottom Cover (82) to the right Handrail (74) as described above.
- Page 15 14. Carefully slide the Upright Crossbar (76) between the Right and Left Uprights (84, 91). Attach the Upright Crossbar with four 5/16" x 3/4" Screws (1); start all four Screws, and then tighten them. 15. Attach the Tray (97) to the Upright Crossbar (76) with four #8 x 3/4"...
- Page 16 16. Raise the Frame (52) to the upright position. IMPORTANT: Have a second person hold the Frame until step 18 is completed. Orient the Latch Crossbar (78) as shown. Make sure that the “This side toward belt” sticker (J) is facing the treadmill. Attach the Latch Crossbar (78) to the brackets (K) on the Frame (52) with the two 5/16"...
- Page 17 18. Remove the 5/16" Nut (9) and the 5/16" x 2 1/4" Bolt (4) from the bracket on the Latch Crossbar (78). Align the upper end of the Storage Latch (56) with the bracket on the Frame (52), and insert the 5/16"...
- Page 18 20. Attach the Tablet Holder (100) to the console assembly (G) with four M4 x 16mm Screws (3); start all four Screws, and then tighten them. Do not overtighten the Screws. 21. IMPORTANT: You must activate your Console (96) to begin using its exclusive features. First, plug in the power cord (see page 19) and turn on the power (see page 21).
-
Page 19: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- Use a Surge Suppressor power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit. - Page 20 CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s sound system while you IMPORTANT: To activate your console and begin exercise. using its exclusive features, see assembly step 21 on page 18.
- Page 21 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room temperature before you turn on the power. If you See HOW TO TURN ON THE POWER at the left.
- Page 22 4. Change the incline of the treadmill as desired. Vertical Distance (VRT FT or VRT M)—The distance you have walked or run in vertical feet or To change the incline of the treadmill, press the vertical meters. Incline increase and decrease buttons or one of the numbered numbered incline buttons.
- Page 23 6. Measure your heart rate if desired. 8. When you are finished exercising, remove the key from the console. You can measure your heart rate using either the handgrip heart rate monitor or a compatible heart Step onto the foot rails, press the Stop button, rate monitor.
- Page 24 HOW TO CONNECT YOUR TABLET TO THE At the end of each segment, the speed and/or incline setting for the next segment will flash in the CONSOLE display to alert you if the setting is about to change. The treadmill will then automatically adjust to the The console supports BLUETOOTH connections speed and incline settings for the next segment.
- Page 25 4. Record and track your workout information. THE SETTINGS MODE Follow the instructions in the iFit–Smart Cardio 1. Select the settings mode. Equipment app to record and track your workout information. To select the settings mode, press the Settings button. The first settings screen will appear in the 5.
- Page 26 Display Test—This screen is intended to be used Contrast Level—The currently selected contrast by service technicians to identify whether the level will appear in the display. Press the Incline display is working correctly. increase and decrease buttons to adjust the contrast level.
- Page 27 HOW TO USE THE SOUND SYSTEM HOW TO USE THE TABLET HOLDER To play music or audio books through the console IMPORTANT: The tablet holder (E) is designed for use with most full-size tablets. Do not place sound system while you exercise, plug a 3.5 mm male any other electronic device or object in the tablet to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your personal audio...
-
Page 28: Fcc Information
FCC INFORMATION This console has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 29: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left. -
Page 30: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE b. After the power cord has been plugged in, make sure that the key is inserted into the console. Regular maintenance is important for optimal perfor- mance and to reduce wear. Inspect and properly tighten c. Check the power switch located on the treadmill all parts each time the treadmill is used. - Page 31 SYMPTOM: The incline of the treadmill does not c. Your treadmill features a walking belt coated with change correctly high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless a. Calibrate the incline system of the treadmill (see instructed to do so by an authorized service THE SETTINGS MODE on page 25).
- Page 32 b. If the walking belt slips when walked on, first SYMPTOM: The tablet holder does not stay in place remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. Rotate the tablet holder (B) until it faces backward. screws clockwise, 1/4 of a turn.
-
Page 33: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 34: Part List
PART LIST Model No. PFTL14018.1 R0818A Key No. Qty. Description Key No. Qty. Description 5/16" x 3/4" Screw Drive Roller/Pulley 5/16" x 2" Screw Frame M4 x 16mm Screw 5/16" x 2 1/4" Bolt Drive Motor #8 x 3/4" Screw Motor Belt #10 x 3/4"... - Page 35 Key No. Qty. Description Key No. Qty. Description Base Pad Console Clamp Wire Tie Filter Console Ground Wire Motor Hood Cover 1/4" x 1" Screw M8.4 Star Washer Pulse Bar Incline Stop Bracket Fan Cover – User’s Manual Fan Housing Note: Specifications are subject to change without notice.
-
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. PFTL14018.1 R0818A... - Page 37 EXPLODED DRAWING B Model No. PFTL14018.1 R0818A...
- Page 38 EXPLODED DRAWING C Model No. PFTL14018.1 R0818A...
- Page 39 EXPLODED DRAWING D Model No. PFTL14018.1 R0818A...
-
Page 40: Ordering Replacement Parts
This warranty extends only to the original purchaser (customer) and is not transferrable. ICON’s obliga- tion under this warranty is limited to repairing or replacing, at ICON’s option, the product through one of its authorized service providers. All repairs for which warranty claims are made must be preauthorized by ICON.