Table of Contents
Advertisement
6. If there are two screws (E) preattached inside
6
each Handrail (84), remove and discard the
28
screws.
11
Attach a Handrail (84) to the Right Upright (90)
with two 5/16" x 3" Screws (28) and two 5/16"
E
81
Star Washers (11); start both Screws, and
84
then tighten them. Make sure not to pinch the
Upright Wire (81).
Attach the other Handrail (not shown) to the
Left Upright (89) in the same way. Note: There
89
are no wires on the left side.
90
7. Set the Console Base (64) face down on a soft
7
surface to avoid scratching the Console Base.
Remove and discard the two indicated screws
64
(F). Then, remove the Pulse Crossbar (31).
F
31
F
11
Advertisement
Table of Contents
