Electrical connection
Operating Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
7.5
Machine head connecting to DAC
Pic. 44: Machine head connecting to DAC
①
②
(1) - Connector M
(2) - Connector - machine head
(3) - Connector ID
1.
Connect the sewing head connection cable into the
connector (2) signed with the machine symbol.
2.
Connect the control panel into the connector (5) signed with
the panel symbol.
3.
Connect the motor encoder connector into the connector (6).
4.
Connect the motor connector into the connector (1).
5.
Connect the set value sensor to the connector (4) signed with
the pedal symbol.
6.
Connect "machine identification" to the connector ID.
⑥
⑤
④
③
(4) - Connector - set value sensor
(5) - Connector - control panel
(6) - Connector E
95