Throttle Neutral Adjuster - FUTABA 3GR-2.4G Instruction Manual

Throttle Neutral Adjuster / THR-NT
You can select your desired throttle neutral position. (7:3 or 5:5)
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
Neutral position selection
1 Use the (+) or (-) buttons to select the neutral position. ("7-3" or "5-5")
2 When ending selection, once turn off the power switch before use.
Stick lever adjustment
- Always adjust the throttle stick lever position according to the above settings.
1 Remove the four transmitter rear case screws and remove the rear case.
2 Adjust the neutral position of the throttle stick ac-
cording to the above neutral position selection by
pressing the throttle stick in the arrow direction.
*Press it downward fully and firmly.
3 Close the rear case and tighten the four screws.
2. Next, use "SEL" key to select
the desired function screen.
Neutral position
"7-3": 7:3
"5-5": 5:5
7:3 5:5
57