Hrs/Ppm Select - FUTABA 3GR-2.4G Instruction Manual

The signal mode output from the transmitter can be changed. (PPM/HRS)
- When the mode was changed and when a model of a different mode was
selected, signals are output in the mode set at the point at which the
transmitter power was turned back on.
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
HRS/PPM mode selection
1 (Mode selection)
Use the (+) or (-) button to select the mode.
2 When ending adjustment, turn off the power switch before use.
HRS/PPM Select / MOD
2. Next, use "SEL" key to select
the desired function screen.
Signal mode
HR: HRS mode
PP: PPM mode
53