Function Select Lever - FUTABA 3GR-2.4G Instruction Manual

Function Select Lever / FNC-DT
This function allows selection of the function performed by digital trim (DT1/DT2/
DT3/DT4).
Initially set functions
DT1: Steering trim
DT2: Throttle trim
DT3: Dual rate function
DT4: ATL function
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
Function select lever setup
1 (Setup item selection)
Use the (CH) button to select the item to be set.
2 (When changing the function)
Use the (+) or (-) button to select the function.
3 When ending adjustment, turn off the power switch before use.
Settable functions
ST: Steering trim
TH: Throttle trim
DR: Steering D/R
AT: Throttle ATL
E1: Steering EXP
BK: Brake mixing rate
3C: Channel 3
OF: (function off)
2. Next, use "SEL" key to select
the desired function screen.
Press "CH" key to select the next set-
up screen.
55