Throttle Mode "Thr Mode; Throttle Servo Neutral Position "Sxnt - FUTABA 4PL-2.4GHZ Instruction Manual

Throttle Mode "THR MODE"

This menu has the following 4 functions:
- Servo neutral mode, which sets the throttle neutral ratio to 7:3 or 5:5
- Idle up, which raises the idling speed when starting the engine to improve engine start-
ing performance of a gasoline car (boat)
- Neutral brake, which applies the brakes at the neutral position of the throttle trigger
- Throttle off (engine cut), which stops the engine of a boat, etc. by operating the throttle
servo to the low side regardless of the position of the throttle trigger.
Display the Throttle mode function screen as described on P64.

Throttle servo neutral position "SXNT"

-This function allows selection of the forward side and brake (reverse) side operation ra-
tio from 7:3 or 5:5 by changing the neutral position of the throttle servo.
Forward side
Selecting the throttle servo neutral position
1
(Mode selection)
Select the setting item "SXNT" by (UP) or (DN) button. Select
"F5/B5" or "F7/B3" by (+) or (-) button.
"F5/B5"
"F7/B3"
2
When ending, return to the ADVANCE menu screen by
pressing the (CT) button.
78
F5/B5
Brake side
5 : 5
=Forward 50% : Back50%
=Forward 70% : Back30%
Throttle Mode "THR MODE"
(Throttle system)
Setup item selection
- Select by by (UP) or (DN) button.
Setup items
SXNT Throttle servo neutral position
IDLUP Idle-Up rate
NTBRK Neutral brake rate
THOFF Throttle off (engine cut) position
F7/B3
Forward side
7 : 3
Adjustment buttons
- Use the (+) and (-) buttons to
Mode selection (SXNT)
Brake side
make adjustments.
F5/B5, F7/B3