FUTABA 3GR-2.4G Instruction Manual page 50

3
(Linking start with the throttle stick)
Select setup item "TIMER" and press the (+) and (-) buttons simulta-
neously for about 1 second. A beeping sound is generated and "RDY"
displays at the timer display and the system enters the RDY state. Stick
operation starts the timer.
(Timer start/stop operation)
The switch SW1 preset by function select switch function (page 54) starts the timer.
Only starting can be linked with the throttle stick.
(LAP memory operation)
This timer can memorize each lap time of each switch (SW1) operation. (100 laps)
Switch operation after the set time by alarm has elapsed automatically stops the
timer. Each lap time is memorized in a lap memory. The lap times are written sequen-
tially. When the timer is stopped, the final lap is memorized and the total time is
automatically written. The lap times are memorized to a next start and can be checked
at the lap time screen.
Checking the lap times
1
Select the lap time screen "ALL" and check the total time.
2
Use the (+) and (-) buttons to scroll each lap screen and check each lap
time.
50