FUTABA 3GR-2.4G Instruction Manual page 32

2
Throttle (brake side/reverse side) adjustment
Pull the throttle stick fully to the brake side and use the (+) and (-) buttons
to adjust the steering angle. However, when using an FET amp, set to
100%.
3
When adjusting the EPA of another channel immediately after this, see the
adjustment method for that channel. When ending adjustment, return to
the initial screen by pressing the (SEL) button.
3rd channel servo (EPA) adjustment
(Preparation)
- Select setup item "3C-L.F.U" and make the following adjustments:
(3rd channnel initial setup: SW2)
1
3rd channel servo (up side) adjustment
Use the (+) and (-) buttons to adjust the steering angle.
2
3rd channel servo (down side) adjustment
Select setup item "3C-R.B.D" and use the (+) and (-) buttons to adjust the
steering angle.
3
When adjusting the EPA of another channel immediately after this, see the
adjustment method for that channel. When ending adjustment, return to
the initial screen by pressing the (SEL) button.
32