Table of Contents
Advertisement
Fig. 40 — Insert Keypad in Slot
Download All Parameters From Backup
To download all parameters from the control panel to the VFD,
perform the following procedure:
1.
Install the control panel with the correct parameters onto the
VFD.
2.
Select MENU (Press
played.
3.
Use the UP or DOWN keys to highlight BACKUPS on the
display screen and press SEL (Press
4.
Use the UP or DOWN keys to highlight the backup file and
press SEL (Press
).
5.
The text "Restoring Parameters" will be displayed with a
progress indicator. To stop the process, select CANCEL
(Press
).
6.
When the download is complete, the text "Parameter down-
load successful" will be displayed.
7.
The display will then return to the PAR BACKUP menu.
Select BACK (Press
8.
The control panel can now be disconnected from the drive.
CLOCK SET MODE
Use the clock set mode to set the date and time for the internal
clock of the VFD. In order to use the timer functions of the VFD
control, the internal clock must be set. The date is used to deter-
mine weekdays and is visible in the fault logs.
To set the clock, perform the following procedure:
1.
Select MENU (Press
displayed.
). The Main menu will be dis-
).
) to return to the main menu.
). The Main menu will be
2.
Use the UP or DOWN keys to highlight PRIMARY SETT.
on the display screen and press ENTER (Press
Sub list will be displayed.
3.
Use the UP or DOWN keys to highlight Clock, region, dis-
play and press SEL (Press
display or hide the clock on the screen. Use the UP or DOWN
keys to change the parameter setting. Press OK (Press
to save the configuration and return to the Sub list menu.
4.
Use the UP or DOWN keys to highlight SET TIME and press
SEL (Press
). Use the UP or DOWN keys to change the
hours and minutes. Press OK (Press
uration and return to the Clock Set menu.
5.
Use the UP or DOWN keys to highlight TIME FORMAT and
press SEL (Press
change the parameter setting. Press OK (Press
the configuration and return to the Clock Set menu.
6.
Use the UP or DOWN keys to highlight SET DATE and
press SEL (Press
change the day, month, and year. Press OK (Press
save the configuration and return to the Clock Set menu.
7.
Use the UP or DOWN keys to highlight DATE FORMAT
and press SEL (Press
change the parameter setting. Press OK (Press
the configuration and return to the Clock Set menu.
8.
Press BACK (Press
I/O SETTINGS MODE
Use the I/O Settings mode to view and edit the I/O settings.
To configure the I/O settings, perform the following procedure:
1.
Select MENU (Press
played.
2.
Use the UP or DOWN keys to highlight PRIMARY SETT.
on the display screen and press SEL (Press
list will be displayed.
3.
Use the UP or DOWN keys to highlight ADVANCED
OPTIONS/FUNCTIONS. on the display screen and press
SEL (Press
) The Sub list will be displayed.
4.
Use the UP or DOWN keys to highlight I/O SETTINGS on
the display screen and press SEL (Press
tings parameter list will be displayed.
5.
Use the UP or DOWN keys to highlight the desired I/O set-
ting and press SEL (Press
6.
Use the UP or DOWN keys to select the parameter to view.
Press OK (Press
7.
Use the UP or DOWN keys to change the parameter setting.
Press SAVE (Press
CANCEL (SOFT KEY 1) to keep the previous value. Any
modifications that are not saved will not be changed.
8.
Press BACK (Press
36
). This parameter is used to
) to save the config-
). Use the UP or DOWN keys to
). Use the UP or DOWN keys to
). Use the UP or DOWN keys to
). twice to return to the main menu.
). The Main menu will be dis-
). The Sub
). The I/O Set-
).
).
). to save the configuration. Press
) twice to return to the main menu.
). The
)
) to save
) to
) to save
Advertisement
Table of Contents
