Advertisement
Component Positions
For simplicity purposes, the following figure shows only the components that you need to operate
and reserved installation positions.
Component 1 of the SmartACU2000B-D-PID/PLC is the power adapter. This model does not
⚫
include components 3, 6, 8, 16, 18, 20, and 22.
⚫
Component 1 of the SmartACU2000B-D-2PID/2PLC is the power adapter. This model does not
include components 18 and 22.
Component 1 of the SmartACU2000B-D-PID/PLC-24V is the 24 V DC power module. This
⚫
model does not include components 3, 6, 8, 16, and 20.
Component 1 of the SmartACU2000B-D-2PID/2PLC-24V is the 24 V DC power module.
⚫
(1) Power adapter or 24 V DC power module (U01) (3) PID01 input switch (QF03)
(4) PID02 input switch (QF05)
(5) Three-phase SPD 1 (F01)
(7) Position for the local area network (LAN) switch
(SWITCH)
(9) PE bar
(11) Fiber adapter (OFA01, OFA02)
(13) Position for the POE module (POE)
(15) Single-phase input switch (QF01)
(17) Three-phase input switch 1 (Knife fuse switch
FU01 or circuit breaker QF02)
(19) RS485 communications terminal (JX01)
(21) PID01
(23) Functional earthing (FE) bar (FE01, FE02)
(4) Single-phase surge protective device (SPD)
(F03)
(6) Three-phase SPD 2 (F02)
(8) PLC CCO
(10) SmartLogger2000 (SmartLogger)
(12) Position for the power over Ethernet (POE)
SPD
(14) Access terminal box (ATB)
(16) Three-phase input switch 2 (Knife fuse switch
FU02 or circuit breaker QF04)
(18) 24 V DC input and output terminals (JX02)
(20) PID02
(22) 24 V DC input and output switches (Output:
QF06, Input: QF07)
3
Advertisement
