3. Remove the ATB cover.
Connect two optical cables in a ring optical network, and connect one optical cable in a star
⚫
optical network.
⚫
As optical cables are hard, prepare optical cables before routing them into the cabinet.
Only professionals are allowed to connect optical cables.
⚫
5. Connect one end of the optical jumper to the fiber adapter.
6. Route the other end of the optical jumper through the cable hole on the side of the ATB, and
then connect the cable to the ATB.
7. Connect the peripheral optical cable to the ATB, splice the optical cable and the optical jumper,
and then wind the spliced cable around the fiber spool on the ATB.
8. Check that the cables are connected correctly and securely. Then reinstall the optical cable
fastener and ATB cover.
4. Remove the optical cable fastener.
17