2. Install expansion bolts.
Support-mounted Installation
1. Mark hole
positions.
Pole-mounted Installation
If you need to pole-mount the smart array controller, prepare a pole mounting bracket based
⚫
on the dimensions of the smart array controller. You are advised to use M12 U-shaped bolts to
secure the pole mounting bracket.
⚫
The figure is for reference only. The actual pole and pole mounting bracket prevail.
1. Secure the pole mounting bracket.
3. Secure the mounting bracket.
2. Drill holes. (You are advised to
apply anti-rust paint on the
hole positions for protection.)
11
3. Secure the
mounting bracket.
2. Secure the mounting bracket.