Supermicro X13SWA-TF Quick Reference Manual page 7

X13SWA-TF QUICK REFERENCE GUIDE
1. Locate the pre-installed standoff and
screw. Remove the screw and set it aside.
2. Using a hex socket screwdriver, remove
and then re-install the standoff to the posi-
tion of the 2280 mounting hole.
3. Insert the M.2 device into the M.2 socket
at a 30-degree angle and press it down.
4. Tighten the screw to secure the M.2 device
into place. Do not overtighten so as to
avoid damaging the M.2 device.
2280 M.2 Device Installation
2280 M.2 Device Installation