Dell Inspiron 13-7375 Service Manual page 107

Table 4. System setup options—Advanced menu
Advanced
PowerNow! Enable
Virtualization
USB Emulation
USB Powershare
USB Wake Support
SATA Operation
Adapter Warnings
Enables or disables the SpeedStep(tm)
mode of the processor. Default: Enabled
Allows you to enable or disable the
Virtualization technology.
Default: Enabled
Allows you to enable or disable the USB
emulation feature. This feature defines
how the BIOS, in the absence of a USB-
aware operating system, handles USB
devices. USB emulation is always
enabled during POST.
NOTE: You cannot boot any type
of USB device (floppy, hard drive,
or memory key) when this option
is off.
Default: Enabled
Allows you to enable or disable the USB
emulation feature.
Default: Enabled
Allows you to enable USB devices to
wake the computer from standby or to
disable the USB wake support feature.
NOTE: If USB PowerShare is
enabled, a device connected to
the USB PowerShare connector
may not wake the computer.
Default: Disabled
Allows you to configure the operating
mode of the integrated SATA hard drive
controller.
Default: AHCI
Allows you to choose if the computer
should display warning messages when
107