Figure (1) Overview
6
2
5
1
Safety ON/OFF Switch
2
Spindle Lock Button
3
Adjustable Guard
Before Using the Grinder
Fit the Handle : Screw the handle
head as required.
Mount the Grinding Wheel / Cutting Disc : See page 7
Adjust the Guard : The guard
from sparks and debris produced when grinding. Slacken the Hex Socket head screw
securing the guard and rotate into position, then retighten the screw.
Connectting to the Power Supply : Connect to the power supply using a Residual Current
Device. Do not use in wet or damp conditions.
WARNING ! Ensure that the power supply is disconnected before adjusting the guard or
mounting the handle.
3
4
4
Handle
5
Abrasive Disk
6
Body
into the left or right hand position in the grinder
(4)
needs to be adjusted to give maximum protection
(3)
- 6 -
for details
( i )
1