Table of Contents
Advertisement
Electrical Connections
Double Insulated Electrical Appliance
This appliance is of Double Insulation Construction. Because of its construction there is no
earth required and therefore there is no Earth connection.
Connect the mains lead to a standard 230V (50Hz) electrical supply through an approved
13 Amp BS1363 plug, or a suitably fused isolator switch.
The two wires in the mains lead should be wired up in accordance with the following colour
code:
IMPORTANT : The wires in the mains lead are coloured in accordance with the following
Blue - Neutral
Brown - Live
As the colours of the flexible cord of this appliance may not correspond with the coloured
markings identifying terminals in your plug proceed as follows:
Connect BROWN coloured cord to plug terminal marked with a letter L or coloured RED
Connect BLUE coloured cord to plug terminal marked with a letter N or coloured Black
IMPORTANT: If this appliance is fitted with a plug which is moulded on to the electric
cable (i.e. non- re-wireable) please note:
1. The plug must be thrown away if it is cut from the electric cable. There is a danger of
electric shock if it is subsequently inserted into a socket outlet.
2. Never use the plug without the fuse cover fitted.
3. Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4. Replacement fuse covers can be obtained from your local dealer or most electrical
stockists.
5. The fuse in the plug must be replaced with one of the same rating (13 amps)
and this replacement must be ASTA approved to BS1362.
IMPORTANT: If in any doubt, do not attempt any electrical repair yourself. Consult a
qualified technician
- 5 -
code:
Advertisement
Table of Contents
