LifeSpan Contour Folding Wood Pilates Reformer Bed User Manual page 9

ASSEMBLE THE RISERS AND ROPES
1. Remove the Riser posts from under the Reformer frame by unscrewing the lock pin and sliding out
the posts. There is one on each side.
FIG 1
2. Take off the preinstalled bolt on the Riser holder and place the Risers into the back as shown (Fig. 1).
Tighten the screw using an Allen key to your preferred height. There are 2 height slots. Repeat the
same on other side (Fig. 2).
FIG 2
ASSEMBLY INSTRUCTIONS | 9