STIEBEL ELTRON HOT 2.6 N Premium Operation And Installation Instructions Manual

STIEBEL ELTRON HOT 2.6 N Premium Operation And Installation Instructions Manual

Under sink water boiler
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

BEDIENUNGS- UND INSTALLATIONSANLEITUNG
OPERATION AND INSTALLATION INSTRUCTIONS
HEISSWASSER-AUTOMAT
UNDER SINK WATER BOILER
» HOT 2.6 N Premium

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOT 2.6 N Premium and is the answer not in the manual?

Questions and answers

Summary of Contents for STIEBEL ELTRON HOT 2.6 N Premium

  • Page 1 BEDIENUNGS- UND INSTALLATIONSANLEITUNG OPERATION AND INSTALLATION INSTRUCTIONS HEISSWASSER-AUTOMAT UNDER SINK WATER BOILER » HOT 2.6 N Premium...
  • Page 2: Table Of Contents

    INHALT  BESONDERE HINWEISE Technische Daten ������������������������������������������� 14 16.1 Maße und Anschlüsse ����������������������������������������� 14 BEDIENUNG 16.2 Landesspezifische Zulassungen und Zeugnisse ���������� 14 Allgemeine Hinweise ����������������������������������������4 16.3 Extreme Betriebs- und Störfallbedingungen �������������� 14 Sicherheitshinweise �����������������������������������������4 16.4 Datentabelle ����������������������������������������������������� 15 Aufbau von Sicherheitshinweisen ���������������������������� 4 KUNDENDIENST UND GARANTIE Andere Markierungen in dieser Dokumentation ����������...
  • Page 3: Besondere Hinweise

    BESONDERE HINWEISE   BESONDERE HINWEISE WARNUNG Verletzung BEI DER VERWENDUNG VON ELEKTROGERÄTEN SIND GRUNDLEGENDE SICHERHEITSVORKEHRUNGEN ZU BEACHTEN, UM DAS RISIKO EINES BRANDES, EINES EL- - Das Gerät darf von Kindern sowie von Personen EKTRISCHEN SCHLAGES ODER EINER VERLETZUNG VON mit verringerten physischen, sensorischen oder PERSONEN ZU VERRINGERN, EINSCHLIESSLICH: - LESEN SIE ALLE ANWEISUNGEN, BEVOR SIE DAS mentalen Fähigkeiten oder Mangel an Erfahrung...
  • Page 4: Bedienung

    BEDIENUNG Allgemeine Hinweise BEDIENUNG 2.1.2 Signalworte SIGNALWORT Bedeutung GEFAHR Hinweise, deren Nichtbeachtung schwere Verletzungen oder Tod zur Folge haben. WARNUNG Hinweise, deren Nichtbeachtung schwere Verletzungen Allgemeine Hinweise oder Tod zur Folge haben kann. VORSICHT Hinweise, deren Nichtbeachtung zu mittelschweren oder Diese Anleitung richtet sich an den Gerätebenutzer und die Fach- leichten Verletzungen führen kann.
  • Page 5: Bestimmungsgemäße Verwendung

    Sie lange Standzeiten des Wassers oder spülen Sie das Gerät re- sacht werden, sind nicht durch die Garantie abgedeckt. gelmäßig. Wir empfehlen eine tägliche Mindestentnahmemenge STIEBEL ELTRON empfiehlt den Einsatz eines externen Fil- von rund 2 Litern. Wenn Sie diese Mindestmenge über längere Zeit tersystems im Kaltwasser-Zulauf des HOT 2.6 N Premium.
  • Page 6: Gerätebeschreibung

    (1 s) en, empfehlen wir ausschließlich die Verwendung einer Grüne LED leuchtet Kochpunkterkennung erfolgreich geprüften STIEBEL ELTRON Armatur. Nur die o. g. Arma- Beide LEDs blinken sch- Fehler. Anzeige im Display beachten nell (1 s) turen sind für den Einsatz mit HOT 2.6 N Premium geprüft Grüne LED blinkt lang-...
  • Page 7: Einstellungen

    BEDIENUNG   Einstellungen 4.2.3 Standardanzeige 5.2.1 Wochentag und Uhrzeit einstellen Nach Einschalten des Gerätes und nachdem die Kochpunkterken- Die Einstellung von Wochentag und Uhrzeit ist notwendig für die nung erfolgt ist, wird im Display die eingestellte Wunschtemper- korrekte Funktion der Zeitprogramme. atur dauerhaft angezeigt.
  • Page 8: Standby Aktivieren/ Deaktivieren

    BEDIENUNG Einstellungen 5.2.4 Filterzähler aktivieren/ deaktivieren f Sobald das Symbol „Parameter editierbar“ erscheint, können Sie mit den Tasten „+“ und „–“ den Wert des Parameters Das Gerät HOT 2.6 N Premium muss ab einer Wasserhärte von ändern. Um den eingestellten Wert zu speichern, drücken Sie größer gleich 8,5 °dH/ 11 °e (1,5 mmol/l) mit einem Wasserfilter die Taste „OK“.
  • Page 9 INSTALLATION Einstellungen f Drücken Sie die Taste „OK“. 5.4.4 Wasserhärte einstellen Der Wochentag bzw. eine Gruppe von Wochentagen wird angezeigt. Sachschaden f Stellen Sie den gewünschten Wochentag bzw. die gewün- Hartes Wasser oder Wasser mit einem hohen Mineral- schte Gruppe von Wochentagen mit den Tasten „+“ und „–“ gehalt kann das Gerät beschädigen.
  • Page 10: Reinigung, Pflege Und Wartung

    Kalk oder eine hohe Mineralkonzentration verur- tecker korrekt einges- sacht werden, sind nicht durch die Garantie abgedeckt. teckt ist. STIEBEL ELTRON empfiehlt den Einsatz eines externen Fil- Das Gerät befindet sich Schalten Sie das Gerät tersystems im Kaltwasser-Zulauf des HOT 2.6 N Premium.
  • Page 11: Gerätebeschreibung

    Das Gerät ist zur Versorgung einer Entnahmestelle für die Erwärmung von Kaltwasser bestimmt. Das Gerät darf nur mit einer offenen (drucklosen) Armatur von STIEBEL ELTRON installiert und verwendet werden. Wenn Sie an- dere Armaturen einsetzen, erlischt die Garantie des Gerätes. Lieferumfang Mit dem Gerät werden geliefert:...
  • Page 12: Elektrischer Anschluss

    INSTALLATION Inbetriebnahme 12. Inbetriebnahme Ordnen Sie die Farbkennzeichnung der Armaturen-Wasseran- schlüsse und des Gerätes einander zu: - Blau = „Kaltwasser-Zulauf“ WARNUNG Stromschlag - Rot = „Heißwasser-Auslauf“ Die Inbetriebnahme darf nur durch eine Fachkraft unter Beachtung der Sicherheitsvorschriften erfolgen. Hinweis Bei der Erstinbetriebnahme und nach längerer Span- nungsunterbrechung (ca. ...
  • Page 13: Kochpunkterkennung

    INSTALLATION Außerbetriebnahme 15. Wartung 12.3 Kochpunkterkennung Nach erfolgreicher Trockengangerkennung startet das Gerät die WARNUNG Stromschlag automatische Kochpunkterkennung. Trennen Sie bei allen Arbeiten das Gerät allpolig vom In dieser Zeit wird „boil“ im Display angezeigt. Die rote LED Stromnetz. leuchtet dauerhaft. Die Kochpunkterkennung dauert ungefähr 15 Minuten.
  • Page 14: Landesspezifische Zulassungen Und Zeugnisse

    INSTALLATION Technische Daten 15.2 Sieb reinigen 16. Technische Daten 16.1 Maße und Anschlüsse 101 (3.98“) 61 (2.4“) 61 (2.4“) (3.54“) Steckverbinder abnehmen 200 (7.87“) HOT 2.6 N Premium Kaltwasser-Zulauf Steckverbinder Heißwasser-Auslauf Tülle Wandaufhängung 16.2 Landesspezifische Zulassungen und Zeugnisse Die Prüfzeichen sind auf dem Typenschild ersichtlich. 16.3 Extreme Betriebs- und Störfallbedingungen Im Störungsfall kann in der Installation kurzzeitig eine Temperatur von maximal 100 °C auftreten.
  • Page 15: Datentabelle

    INSTALLATION Technische Daten 16.4 Datentabelle HOT 2.6 N Premium GB HOT 2.6 N Premium EU HOT 2.6 N Premium AU 344294 353322 344293 Elektrische Daten Nennspannung 1 Nennspannung 2 Nennspannung 3 Nennleistung 1 1,45 1,45 1,45 Nennleistung 2 Nennleistung 3 1,75 1,75 1,75 Nennstrom 1 Nennstrom 2 Nennstrom 3 Absicherung Phasen 1/N/PE 1/N/PE 1/N/PE Frequenz 50-60...
  • Page 16 Beschädigung eines Gerätes durch Diebstahl, Feuer, höhere oder schreiben Sie uns: Gewalt oder ähnliche Ursachen. Stiebel Eltron GmbH & Co. KG Über die vorstehend zugesagten Garantieleistungen hinausgehend – Kundendienst – kann der Endkunde nach dieser Garantie keine Ansprüche wegen mit- Dr.-Stiebel-Str.
  • Page 17 UMWELT UND RECYCLING   Umwelt und Recycling f Wenn auf dem Gerät eine durchgestrichene Mülltonne abgebildet ist, bringen Sie das Gerät zur Wiederverwendung und Verwer- tung zu den kommunalen Sammelstellen oder Rücknahmestellen des Handels. Dieses Dokument besteht aus recyclebarem Papier. f Entsorgen Sie das Dokument nach dem Le- benszyklus des Gerätes gemäß...
  • Page 18 CONTENTS SPECIAL INFORMATION 16.3 Extreme operating and fault conditions ������������������� 30 16.4 Data table �������������������������������������������������������� 31 OPERATION GUARANTEE, ENVIRONMENT AND RECYCLING General information ��������������������������������������� 20 GUARANTEE, ENVIRONMENT AND RECYCLING FOR AUSTRALIA Safety instructions ����������������������������������������� 20 Structure of safety instructions ������������������������������ 20 Other symbols in this documentation ����������������������...
  • Page 19: Special Information

    SPECIAL INFORMATION SPECIAL INFORMATION WARNING Injury BASIC SAFETY PRECAUTIONS MUST BE OBSERVED WHEN USING ELECTRICAL EQUIPMENT TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, INCLUDING: - The appliance must not be used by children or - READ ALL INSTRUCTIONS BEFORE USING THE APPLI- persons with reduced physical, sensory or mental ANCE.
  • Page 20: Operation

    OPERATION General information OPERATION 2.1.2 Signal words SIGNAL WORD Meaning DANGER Failure to observe this information will result in serious injury or death. WARNING Failure to observe this information may result in serious General information injury or death. CAUTION Failure to observe this information may result in moderate This manual is intended for appliance users and qualified con- or minor injury.
  • Page 21: Intended Use

    STIEBEL ELTRON recommends the use of an external filter please draw off the total content of the appliance (2.6 litres) after system in the cold water inlet of the HOT 2.6 N Premium.
  • Page 22: Appliance Description

    Green LED illuminates, Boiling point detection To avoid damage to the appliance and installation, we red LED flashes quickly recommend using only a tested STIEBEL ELTRON tap. Only (1 s) the above taps have been tested and approved for use Green LED illuminates Boiling point detection successful with the HOT 2.6 N Premium.
  • Page 23: Settings

    OPERATION Settings 4.2.3 Standard display 5.2.1 Select day of the week and time After switching on the appliance and once the boiling point has The day of the week and the time must be set for the time pro- been detected, the set preferred temperature is permanently dis- grams to function correctly.
  • Page 24: Activate/Deactivate Standby

    OPERATION Settings 5.2.4 Activate/deactivate filter counter 5.4.1 Set time programs/timer mode The HOT 2.6 N Premium appliance must be operated with a water There are three time programs available when using the appliance filter if the water hardness is greater than or equal to 8.5 °dH/11 °e in timer mode.
  • Page 25 INSTALLATION Settings f Press “OK”. 5.4.5 Factory settings reset Hot water phase “3-01” has been configured. The Pro3 time Activating parameter P6 resets the appliance to the factory setting. program is displayed again. Notice: The filter function setting (on/off) is retained after resetting f Press “OK”...
  • Page 26: Cleaning, Care And Maintenance

    STIEBEL ELTRON recommends the use of an external filter The appliance is on Switch on the appliance system in the cold water inlet of the HOT 2.6 N Premium.
  • Page 27: Appliance Description

    The appliance is intended to heat cold water for supplying a single draw-off point. The appliance must only be installed and used with an open vented (non-pressurised) tap from STIEBEL ELTRON. If you use other taps, the appliance guarantee will be void. Standard delivery The following are delivered with the appliance: - Wall mounting bracket.
  • Page 28: Water Connection

    INSTALLATION Commissioning 11.2 Water connection 11.3 Electrical connection The water connection of the appliance is via the non-pressurised WARNING Electrocution tap. For this, observe the tap operating and installation instruc- Carry out all electrical connection and installation work tions. in accordance with relevant regulations. f First install the tap.
  • Page 29: Boil-Dry Protection

    INSTALLATION Shutting down the system 13. Shutting down the system 12.2 Boil-dry protection The appliance PCB carries out a boil-dry protection check during f Isolate the appliance from the power supply by removing the initial start-up and after every power supply interruption: plug or by tripping the MCB in the fuse box. f Drain the appliance (see chapter “Installation / Maintenance / Red LED Illuminates for 20 s Appliance heating up...
  • Page 30: Clean The Strainer

    INSTALLATION Specification 15.2 Clean the strainer 16. Specification 16.1 Dimensions and connections 101 (3.98“) 61 (2.4“) 61 (2.4“) (3.54“) Remove the push-fit connector 200 (7.87“) HOT 2.6 N Premium Cold water inlet Plug-in connector Hot water outlet Grommet Wall mounting bracket 16.2 Country-specific approvals and certifications See the type plate for test symbols.
  • Page 31 INSTALLATION Specification 16.4 Data table HOT 2.6 N Premium GB HOT 2.6 N Premium EU HOT 2.6 N Premium AU 344294 353322 344293 Electrical data Rated voltage 1 Rated voltage 2 Rated voltage 3 Rated output 1 1.45 1.45 1.45 Rated output 2 Rated output 3 1.75 1.75 1.75 Rated current 1 Rated current 2 Rated current 3 Fuse protection...
  • Page 32 Who gives the warranty 9.1. The model number of the unit; The warranty is given by Stiebel Eltron (Aust) Pty Ltd (A.B.N. 82 066 271 083) of 294 Salmon Street, Port Mel- 9.2. A description of the problem with the unit;...
  • Page 33 The Stiebel Eltron warranty for the unit is in addition to any l) act of God, including damage by flood, storm, fire, rights and remedies you may have under the Australian lightning strike and the like;...
  • Page 34 NOTES |  HOT 2.6 N Premium www.stiebel-eltron.com...
  • Page 35 NOTES www.stiebel-eltron.com HOT 2.6 N Premium  |...
  • Page 36 Co m f o r t t h r o u gh Te c h n o l o g y STIEBEL ELTRON International GmbH Dr.-Stiebel-Straße 33 | 37603 Holzminden | Germany info@stiebel-eltron.com | www.stiebel-eltron.com 4 < A M H C M O = f b c g g a >...

Table of Contents