11.30
Removing the right side cover
SERVICE WORK ON THE CHASSIS 11
Main work
–
Remove screws
–
Take off outer tube
–
Remove glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount the new glass fiber yarn filling on the inner tube.
Info
Mount the glass fiber yarn filling so that the thermal
protection foil is positioned on the right in the direction
of travel.
–
Slide outer tube over the inner tube with the new glass fiber
yarn filling.
Info
Seal the connecting cap
cone.
V01312-10
–
Mount and tighten the screws.
Guideline
Screw, main silencer
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Pull off the side cover sideways in areas
remove toward the front.
V01290-10
1
.
2
.
3
from inner tube
5
to the outer tube with sili-
M5
7 Nm (5.2 lbf ft)
p. 60)
p. 62)
A
and
4
.
B
, and
61