Installing And Pointing Ct28 On The Wall Bracket - 1 Sound Contour CT28 Installation Manual

CONTOUR CT28 WALL & CEILING INSTALLATION
Figure 33. Tightening the screw anchors with a
torque wrench.
• Using a torque wrench, tighten each screw anchor into the
wall. Take care not to exceed the maximum installation torque
specified by the manufacturer of the hardware.
Figure 34. Applying downward force to verify the
mount.
• Apply force or weight to the mounting plate to physically verify
its ability to support the necessary load. There must be no
movement possible between the plate and the wall.

Installing and pointing CT28 on the Wall Bracket

Once the yoke of the Wall Bracket has been attached to the wall and the
tilt arm of the bracket is installed on the CT28 enclosure, the installation
can be completed by re-coupling the components of the bracket, and
then securing and pointing the loudspeaker to achieve the required
coverage.