Table of Contents
Advertisement
CONTOUR CT28 WALL & CEILING INSTALLATION
Figure 103. The clearance and drilling template of
the wall-mounted face of the CT28 Angle Bar.
Figure 104. Marking a wall for drilling.
Figure 105. Marking a ceiling for drilling.
• When it has been verified that there is no wiring or plumbing in
the wall or ceiling behind the mounting position, use the Angle
Bar itself as a drilling template and mark with the pencil the
centers and outlines of the mounting holes. In case of a wall
installation, a spirit level can be useful to assure that the mount
is properly leveled.
Figure 106. Drilling the mounting holes.
Advertisement
Table of Contents
