Table of Contents
Advertisement
Figure 74. Aligning the lug on the angle-adjustment
plate with the hook on the wall-mounted yoke.
• Lower the speaker enclosure so that the two lugs on the end-
plates engage the hooks on the wall-mounted yoke. DO NOT
release the CT28.
Figure 75. Positioning the CT28 for the required
coverage (-30° shown).
• As one person holds and tilts the speaker enclosure, the second
operator should help to align the holes in the bracket to apply
the required tilt angle (see the figure and examples).
| 4 - INSTALLING CT28 ON THE HORIZONTAL MOUNTING BRACKET
Figure 76. The tilt-locking holes and their
corresponding angles (0° being perpendicular to
wall).
Figure 77. Example alignment of an even angle
(-10°).
Advertisement
Table of Contents
