Table of Contents
Advertisement
CONTOUR CT28 WALL & CEILING INSTALLATION
Use Proper Eye, Ear, Head, Foot and Hand Protection
During Installation
This task requires the use of power tools and
potentially elevated loads.
All local and national norms, regulations and guidelines
must be followed during the installation procedures,
including the use of proper protective clothing and
gear.
Notice: Due to the wide variety of building materials and
construction methods that can be encountered in an installation,
1 Sound can only provide general recommendations for installing
the Horizontal Mounting Bracket. It is the responsibility of the
installer to assess the appropriate stability and sturdiness of
the installation. This includes verifying the positions of suitable
studs, posts or framing in the case of drywall mounts, verifying
hollow points in masonry, concrete block or solid concrete,
and utilizing anchoring methods and hardware appropriate for
safe installation of the equipment according to the construction
material and depth of the mounting surface. The responsibility
rests with the installer to verify that the installation is carried
out in accordance with any applicable legislation. In case of any
doubt, architects, structural engineers or other specialists should
be consulted.
Before proceeding with the installation, be sure to verify the available
horizontal and vertical space for the speaker enclosure with the bracket
attached, referring to the figures below.
Figure 62. The necessary horizontal clearance for
the CT28 on the Horizontal Mounting Bracket
CAUTION
Figure 63. The necessary vertical and forward
clearance for the CT28 on the Horizontal Mounting
Bracket (perpendicular to wall).
Figure 64. The necessary vertical clearance for
the CT28 on the Horizontal Mounting Bracket
(maximum tilt).
Figure 65. The wall-mounted yoke of the CT28
Horizontal Mounting Bracket
Advertisement
Table of Contents
