Table of Contents
Advertisement
3. Features
⚫ SX1276 wireless communication module
⚫ 2 x ER14505 3.6V Lithium battery
⚫ 3-phase current raw data detection
⚫ Magnetic base
⚫ IP53 main body
⚫ LoRaWAN
TM
Class A compatible
⚫ Frequency Hopping Spread Spectrum (FHSS)
⚫ Third-Party online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS
text and email (optional)
⚫ Available third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne
⚫ Low power consumption and longer battery life
Note: Please refer to
http://www.netvox.com.tw/electric/electric_calc.html
configurations.
4. Setup Instruction
On/Off
Power on
Turn on
Turn off (Reset to factory setting)
Power off
Note: 1.The device will be off after removing the battery and insert it again.
2. It is suggested to wait at least 10 seconds between turning the device on and off.
3. 5 seconds after power on, the device will be in engineering test mode.
Network Joining
Never joined the network
Had joined the network
(without resetting to factory setting)
Insert batteries. (users may need a screwdriver to open)
Press and hold the function key for 3 seconds until the green indicator flashes once.
Press and hold the function key for 5 seconds until green indicator flashes 20 times.
Remove Batteries.
Turn on the device and search for the network to join.
The green indicator light stays on for 5 seconds: Success
The green indicator light remains off: Fail
Turn on the device and search for the previous network to join.
The green indicator light stays on for 5 seconds: Success
The green indicator light remains off: Fail
3
for more information of battery lifespan at different
Advertisement
Table of Contents
