netvox R718T2 User Manual
  1. Manuals
  2. Brands
  3. netvox Manuals
  4. Recording Equipment
  5. R718T2
  6. User manual

netvox R718T2 User Manual

Wireless 2-input push button interface
Hide thumbs Also See for R718T2:
Table of Contents

Advertisement

Quick Links

Download this manual
Model：R718T2
Wireless 2-Input Push Button Interface
Wireless 2-Input Push Button Interface
R718T2
User Manual
Copyright©Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX
Technology. It shall be maintained in strict confidence and shall not be disclosed to other
parties, in whole or in part, without written permission of NETVOX Technology. The
specifications are subject to change without prior notice.

Advertisement

Table of Contents
loading

Related Manuals for netvox R718T2

Summary of Contents for netvox R718T2

  • Page 1 This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change without prior notice.

  • Page 2: Table Of Contents

    Table of Content 1. Introduction ......................2 2. Appearance ......................3 3. Main Features ...................... 3 4. Set up Instruction ....................4 5. Data Report ......................5 5.1 Example of ReportDataCmd ................ 5 5.2 Example of ConfigureCmd ................6 5.3 Example of ButtonPressTime ..............7 5.4 Example for MinTime/MaxTime logic ............

  • Page 3: Introduction

    Wireless 2-Input Push Button Interface allows a notification signal to be sent when connected push button is pushed. When someone is in danger and needs emergency assistance, press the emergency push button device; R718T2 immediately sends an alarm message to the gateway. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption.

  • Page 4: Appearance

     Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne  Low power consumption and long battery life Battery Life: ⁻ Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html ⁻ At this website, users can find battery life time for variety models at different configurations.

  • Page 5: Set Up Instruction

    4. Set up Instruction On/Off Power on Insert batteries (Users may need a screwdriver to open) Turn on Press and hold the function key for 3 seconds and the green indicator flash once. Turn off Press and hold the function key for 5 seconds and the green indicator flashes 20 (Restore to factory setting) times.

  • Page 6: Data Report

    1. The device report interval will be programmed based on the default firmware which may vary. 2. The interval between two reports must be the minimum time. 3. Please refer Netvox LoRaWAN Application Command document and Netvox LoRa Command Resolver http://loraresolver.netvoxcloud.com:8888/page/index...

  • Page 7: Example Of Configurecmd

    0x01 (1Byte, unit:0.1V) 0:noalarm 1:alarm) 0:noalarm 1:alarm) (5Bytes,fixed 0x00) Uplink: 0148012401000000000000 byte (01): Version byte (48): Device Type 0x48 ,R718T2 byte (01): ReportType byte (24): Battery 3.6v , 24 H =36 D 36*0.1v=3.6v byte (01): Alarm1 - alarm byte (00): Alarm2-...

  • Page 8: Example Of Buttonpresstime

    (1) Configure device parameters MinTime = 1min, MaxTime = 1min, BatteryChange = 0.1v Downlink: 0148003C003C0100000000 003C(H = 60(D Device returns: 8148000000000000000000 (configuration successful) 8148010000000000000000 (configuration failed) (2) Read device parameters Downlink: 0248000000000000000000 Device returns: 8248003C003C0100000000 (current device parameters) 5.3 Example of ButtonPressTime FPort：0x0D Description CmdID...

  • Page 9: Example For Mintime/Maxtime Logic

    8100 (configuration successful) 8101 (configuration failed) (2) Read device parameters Downlink: 0200 Device returns: 8202 (current device parameters) 5.4 Example for MinTime/MaxTime logic Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e.BatteryVoltageChange=0.1V MaxTime MaxTime Sleeping(MinTime) Sleeping(MinTime) Wakes up and collects data Wakes up and collects data Wake up and collects data...
  • Page 10 MaxTime Sleeping(MinTime) sleeping sleeping sleeping Wakes up and Wakes up and Wakes up and Wakes up and Wakes up and collects data collects data collects data collects data collects data 3.6V REPORT 3.6V 3.6V 3.6V REPORT 3.6V Does not report Does not report Does not report Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change...

  • Page 11: Information About Battery Passivation

    6. Information about Battery Passivation Many of Netvox devices are powered by 3.6V ER14505 Li-SOCl2 (lithium-thionyl chloride) batteries that offer many advantages including low self-discharge rate and high energy density. However, primary lithium batteries like Li-SOCl2 batteries will form a passivation layer as a reaction between the lithium anode and thionyl chloride if they are in storage for a long time or if the storage temperature is too high.

  • Page 12: Important Maintenance Instruction

    7. Important Maintenance Instruction Kindly pay attention to the following in order to achieve the best maintenance of the product: • Keep the device dry. Rain, moisture, or any liquid, might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely. •...

Table of Contents