Main Features - netvox R718IJK User Manual

Wireless multi-sensor interface for 0-24v adc, dry contact and 4-20ma sensors

Hide thumbs Also See for R718IJK:

Table of Contents

3. Main Features

 Apply SX1276 wireless communication module

 Powered by 2 x ER14505 3.6V battery in parallel

 Object to be detected connect 0-24V ADC port, then press the button, it sends an uplink packet

reporting voltage.

 Object to be detected connect 4-20mA port, then press the button, it sends an uplink packet

reporting current.

 Object to be detected connect dry contact port, then press the button, it sends an uplink packet

reporting status.

 Compatible with LoRaWAN

 Frequency hopping spread spectrum

 Protection class IP65

 Configuration parameters can be configured via a third-party software platform, data can be read

and alerts can be set via SMS text and email (optional)

 Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

 Improved power management for longer battery life

Note

Battery Life*2: Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html

At this website, users can find battery life time for varier models at different configurations.

1. Actual range may vary depending on environment.

2. Battery life is determined by sensor reporting frequency and other variables.

Class A

Table of Contents